Helpline No. UK/Northern Ireland 0151 6491500
Rep. Ireland 1890 946244
Model Number: 9053
24
Setting the idling speed
Important. Set the idling speed when the machine
is warm. If the engine stalls when the throttle is not
pressed and you have ruled out all the other causes
listed in section 13 Troubleshooting, the idling speed
must be adjusted. To do this turn the idling speed
screw (Fig. 19/Item 5) clockwise until the machine
runs smoothly at idling speed.
If the idling speed is so fast that the cutting blades
do not reach a standstill, the idling speed must
be reduced by turning the idling speed screw
(Fig. 19/Item 5) counterclockwise until the
cutting blades stop.
Restarting
1
Remove the spark plug.
2
Pull the starter cable several times to clean the oil
residue out of the combustion chamber.
3
Clean the spark plug contacts or fit a new spark
plug.
4
Fill the tank. See the section entitled Fuel and oil.
5
Complete steps 1-7 described under the point
entitled “Starting the engine from cold”.
Ordering replacement parts
Please quote the following data when ordering
replacement parts:
•
Type of machine
•
Article number of the machine
•
Identification number of the machine
•
Replacement part number of the part required
Helpline Numbers
:
UK: 0151 649 1500
IRE: 189 094 6244
GLPHT26 User Guide Artwork.qxd 28/1/08 9:11 am Page 25
