![background image](http://html1.mh-extra.com/html/gardenline/glbv-2501/glbv-2501_manual_3523312004.webp)
AFTER SALES SUPPORT
MODEL NUMBER: 8027, 08/2011, GLBV 2501
06
www.einhell.co.uk
GB
0151 649 1500
(Charged at local rates)
1890 946 6244
IRE
www.einhell.co.uk
GB
0151 649 1500
(Charged at local rates)
1890 946 6244
IRE
AFTER SALES SUPPORT
MODEL NUMBER: 8027, 08/2011, GLBV 2501
07
Do not carry the tool by its power cable.
Always pull out the power plug:
When the tool is not being used, when it is being
transported or when you leave it unsupervised.
When you are checking the tool, cleaning it or removing
blockages.
When you want to carry out cleaning or maintenance work
on the tool or replace accessories.
After the tool impacts with foreign bodies or you notice
unusual vibrations.
Use the tool only in broad daylight or in well-lit conditions.
Do not underestimate the forces involved. Make sure you stand
squarely and keep your balance at all times.
If possible, avoid using the tool on wet grass.
Ensure that you maintain a steady foothold particularly while
working on slopes.
Never run carrying the equipment.
Always keep the ventilation opening clean.
Never direct the vacuum/blow hole at people or animals.
The machine may only be used at reasonable times of the day,
i.e. not in the early morning or late evening when it will be a
nuisance to other people. Permitted times of use specified by
local authorities must be observed.
The machine must be run at the lowest possible motor speed
required to carry out the work.
Remove all foreign objects with a rake and brush before starting
any blowing or vacuuming work.
Where conditions are dusty, dampen the surface a little or use a
sprinkler attachment.
Use the full-length blower nozzle extension so that the air
current can work near to the ground.
Watch out for children, pets, open windows etc. and blow the
foreign objects safely away from them.
Maintenance and storage
Check that all nuts, bolts and screws are securely tightened in
order to be sure that the machine is in a safe working condition.
Frequently check the debris bag for signs of wear and deformation.
Use only genuine accessories and spare parts. To order
replacement bags call the after sales helpline on 0151 649 1500 or go
to www.einhell.co.uk.
For your own safety, replace worn or damaged parts without delay.
Electric tools should be kept in a dry place when not in use.
If the mains cable for this device is damaged, it must be replaced
by the manufacturer or its after-sales service or similarly trained
personnel to avoid danger.
The tool can be plugged into any socket-outlet (with 230 V AC) that is
equipped with a 10A fuse or higher. The socket-outlet has to be
safeguarded by an earthleakage circuit breaker (e.l.c.b.). The
operating current must not exceed 30 mA.
CAUTION!
Read all safety regulations and instructions.
Any errors made in following the safety regulations and instructions
may result in an electric shock, fire and/or serious injury. Keep all
safety regulations and instructions in a safe place for future use.
Explanation of the warning signs on the equipment (see Fig. 8)
1.
Read the directions for use before operating the tool.
2.
Do not use the tool in rain or snow. Do not expose the tool to
wet conditions.
3.
Keep all other people away from the working areas.
4.
Wear eye protection and ear defenders.
5.
Switch off the tool and pull out the power plug before carrying
out any cleaning or maintenance work.
6.
Rotating parts. Keep your hands and feet away from all openings.
7.
Any damage done inside the machine by vacuuming foreign objects
such as sharp stones and metal objects, will void the warranty.
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•