background image

Cleaning and maintenance

21

3. Tip the saw forwards and plunge the saw blade 

1

 into the workpieces (see 

Fig. F

).

4. Hold the saw with both hands in a vertical position and continue to saw along the 

sawing line.

Switching the saw off

 

− In order to switch the saw off, release the power switch 

12  

and wait until the 

saw has come to a complete standstill.

 

− In order to deactivate the saw, press the battery unlocking button 

10  

and re-

move the rechargeable battery 

9

 from the saw.

 

− Let the saw cool off completely before putting it down.

Cleaning and maintenance

 

WARNING!

Risk of injury!

Improperly handling the saw may result in injury.

 

− Remove the rechargeable battery from the saw before beginning work on 

the saw.

 

− Let the saw cool off completely before performing work on the saw.

 

− Remove the saw blade before performing work on the saw and wear pro-

tective gloves to prevent cut injuries.

 

− Wear protective goggles when cleaning.

 

− After performing any cleaning and maintenance work, mount all protec-

tive devices, to the extent present, properly and safely. Never use the saw 

without protective devices.

NOTICE!

Risk of short circuit!

Water that has penetrated the housing may cause a short circuit.

 

− Never submerge the saw in water or other liquids.

 

− Make sure that no water or other liquids penetrate the housing.

Summary of Contents for GDGS12G

























Reviews: