m
DANGER
The manufacturer of this equipment shall be not liable to the applicable
Product Liability Act for damages arising in this device or this unit at:
•
Installation and replacement of non-original spare parts,
•
Removal or alteration of safety components.
5.7 Operating instructions
m
Important notices
1)
Turn off the motor if the saw comes in contact with foreign objects. Check the
saw and, if applicable, repair it.
2)
Protect the chain from dirt and sand. Even small quantities of dirt can quickly
make the chain blunt and increase the risk of kickback.
3)
Start by cutting up smaller logs to practise in order to get a feel for the device,
before attempting difficult tasks.
4)
Activate the throttle at maximum, before starting sawing.
5)
Press the casing of the chainsaw against the log when starting sawing.
6)
Run the device at full throttle throughout the whole sawing process.
7)
Let the saw do the work. Only use slight downwards pressure.
8)
Release the throttle as soon as you have finished your work so the motor runs
idle. If you let the machine run at full throttle without load, there will be
unnecessary wear and tear.
9)
So that you do not lose control of the device after the chain exits the wood,
you should not apply any pressure to the saw towards the end of the cut.
10)
Turn off the device before putting it down.
11)
Check after starting the idle setting. The cutting blade must be stationary
during idling.
Felling trees - only with relevant training
m
CAUTION
Watch out for broken or dead branches which may fall down during sawing and
which could cause severe injuries. Do not saw close to buildings or power lines if
you do not know in which direction the felled tree will fall. Do not work at night
because you can see less well, or during rain, snow and storms because the
direction in which the tree will fall cannot be anticipated.
•
Plan your work with the chainsaw in advance.
28
AFTER SALES SUPPORT
00800 4003 4003
MODEL: CSP41 PRODUCT CODE: 64055 04/2017
Safety regulations
Petrol chainsaw 41cc