Gardenline 52742 User Manual Download Page 10 | Manualshive

Page: 10 / 36

Gardenline 52742 User Manual Download Page 10

AFTER SALES SUPPORT

(toll free)

e-mail: help@powertoolsupport.com

1800 909 909

MODEL: №.

YR-HT250 • 08/2016 • 52742

25cc 4 Stroke Petrol Hedge Trimmer

A moment of inattention while operating the hedge trimmer may result

in serious personal injury.

• Carry the hedge trimmer by the handle with the cutter blade and motor

stopped. When transporting or storing the hedge trimmer, always fit the

cutter device covers. Proper handling of the hedge trimmer will reduce

possible personal injury from the cutter blade.

• Prior to cutting with the hedge trimmer, always check the area to be

cut for hidden objects. Be observant for fencing wire, Garden stakes, or

electrical cables. Ensure to remove any of these objects prior to starting.

•    Do not use the hedge trimmer in poor weather conditions.
•    Do not use the hedge trimmer in poor light.
•    Always use both hands when operating the hedge trimmer, one on the

rear handle and the other on the front handle.

• Wear goggles

• Wear earmuffs

• Wear headwear protection

8

NOISE dBA

82

«
...
8
9
10
11
12
...
»

Summary of Contents for 52742





































Reviews:

No comments