26
Mounting the upper handlebar
Attach the upper handlebar with the mounting screws (13) and clamping handles (13)
on each side.
Installing the wheels
Secure the middle bar of
the wheels of the mounting plate
on the hull with bolts M8, nuts
and winged nuts. There are 4
height positions, among which to
choose.
Fig. 3
VII. USE
GENERAL
• Complete training on how
to use this device.
Familiarize yourself with
the buttons and controls. Practice
all the different movements with the power off.
• Always hold the unit firmly with both hands throughout the work.
Never use the unit holding it with one hand.
• The cable must be routed to the rear, away from strawberries and positioned so that
it can never be caught in the mechanism.
• Lift the unit to move it over hard surfaces. Do not lift or drag the machine while the
engine is running.
VERIFICATION
• Always visually inspect the product shows no signs of wear or damage.
