28
9.
Maintenance of Saw Chain and Guide Bar
After every cutter has been set, check the depth gauge and file it to the proper
level as illustrated.
Be sure to round off the front edge to reduce the chance of kickback or tie-strap
breakage.
(1)
Appropriate gauge checker
(2)
Make the shoulder round
(3)
Depth gauge
standard
Make sure every cutter has the same length and edge angles as shown below.
(4) Cutting length (5) Filling angle (6) Side plate angle (7) Top plate cutting
angle
Summary of Contents for GC3814
Page 35: ...34...
