manualshive.com logo in svg

Gardena SILENO R100Li, Operator'S Manual

Share
Download
Gardena SILENO R100Li Operator'S Manual Download Page 44

English - 43

MENU FUNCTIONS

6.2 Menu structure

The following table summarises the menu selections found in the main menu. The following chapter provides more 

detailed information about how each function is used and which setting options are available. 

Use the arrow keys to browse the menu. Confirm selections with 

OK

.

Timer 

The lawn should not be cut too often to obtain the best mowing result. Consequently, 

it is important to limit the operating time using the timer function if the working area 

is less than the robotic lawnmower’s working capacity. The timer function is also an 

ideal tool to control which periods the robotic lawnmower should not mow, for example, 

when the children are playing in the garden.

SensorControl 

Only for GARDENA R130Li, R130LiC,R160Li.

 

This function allows the robotic lawnmower to automatically adjust its mowing times 

based on how quick the lawn grows. When the weather is good for grass growth, the 

robotic lawnmower mows more often and when grass growth is slower the robotic 

lawnmower will automatically spend less time on the lawn. 

Smart System 

Only for GARDENA R100LiC, R130LiC 

 

GARDENA Smart System enables wireless interaction between the Mower and other 

devices in GARDENA Smart System, such as Water Controls and Sensors. From 

this menu you can include or exclude your robotic mower, and check your wireless 

connection status to Smart System. 

Security 

In this menu, settings relating to security and the connection between the robotic 

lawnmower and the charging station can be made. 

There are three security levels to choose from but it is also possible to define your own 

combination of security functions. 

Installation 

This menu function is used to steer the robotic lawnmower to remote parts of a 

working area. For many working areas there is no need to alter the factory settings, 

but depending on the lawn complexity the mowing result can be improved by making 

manual settings. 

Settings 

This selection allows you to make changes to the general robotic lawnmower settings 

such as date and time. 

1157808,Gardena_R100Li-R130Li,GB_151217.indd   43

2016-01-12   09:16:46

Summary of Contents for SILENO R100Li





















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands