manualshive.com logo in svg

Gardena SILENO R100Li, Operator'S Manual

Share
Download
Gardena SILENO R100Li Operator'S Manual Download Page 33

English - 32

INSTALLATION

3.8 First start-up and calibration 

Before the robotic lawnmower is operated, a start-up 

sequence in the robotic lawnmower’s menu must be 

carried out as well as an automatic calibration of the 

guide signal.

1.  Open the control panel hatch by pressing the 

STOP

 button. 

2.  Set the main switch to position 

1

.

A start-up sequence begins when the robotic lawnmower 

is started for the first time. The following is requested:

•  Language.
• 

Country.

• 

Date.

• 

Time.

•  Selection and confirmation of personal PIN code.

All combinations except 0000 are permitted.

Place the robotic lawnmower in the charging station and 

press 

START

.  

The robotic lawnmower will now begin to calibrate the 

guide wire. Press 

START

 and close the hatch. The 

calibration is performed by the robotic lawnmower backing 

out of the charging station and running a calibration 

process in front of the charging station. When this is 

completed, mowing can begin. 

IMPORTANT INFORMATION
Use Memo on page 2 to

 

make a note of the 

PIN code.

 

3.9 Test docking with the charging 

station

Before using the robotic lawnmower, check that the 

robotic lawnmower can follow the guide wire all the way 

to the charging station and easily docks with the charging 

station. Perform the test below.

1.  Open the control panel cover by pressing the 

STOP

 button.

2.  Place the robotic lawnmower close to the point 

where the guide wire is connected to the boundary 

wire. Place the robotic lawnmower about 2 metres 

from the guide wire, facing the guide wire. 

3.  Press the 

PARK

 button and close the cover.

1157808,Gardena_R100Li-R130Li,GB_151217.indd   32

2016-01-12   09:16:30

Summary of Contents for SILENO R100Li





















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands