manualshive.com logo in svg

Gardena SILENO R100Li, Operator'S Manual

Share
Download
Gardena SILENO R100Li Operator'S Manual Download Page 23

English - 22

INSTALLATION

Working area boundaries

If a high obstacle (5 cm or more), for example a wall 

or fence, borders the working area, the boundary wire 

should be laid 35 cm from the obstacle. This will prevent 

the robotic lawnmower from colliding with the obstacle 

and reduce body wear.

About 20 cm of the lawn around the fixed obstacle will not 

be mown. 

If the working area borders on a small ditch, for example 

a flower bed or a small elevation, for example a low 

kerbstone (1-5 cm), the boundary wire should be laid 

30 cm inside the working area. This prevents the wheels 

from driving into the ditch or up onto the kerbstone 

which might be lead to excessive wear on the robotic 

lawnmower, and especially the front wheels.
About 15 cm of the lawn along the ditch/kerbstone will not 

be mown. 

If the working area borders on a paving stone path or 

similar that is level with the lawn (+/- 1 cm), it is possible 

to allow the robotic lawnmower to run a little over the 

path. The boundary wire should then be laid 10 cm from 

the edge of the path.
All the grass along the side of the paving stone path will 

be cut. 

When the working area is divided by a paving stone 

path that is level with the lawn, it is possible to allow the 

robotic lawnmower to run over the path. It can be an 

advantage to lay the boundary wire under the paving 

stones. The boundary wire can also be laid in the joint 

between the paving stones. Ensure that the tiles are in 

level with the lawn to avoid excessive wear on the robotic 

lawnmower.

Note: 

The robotic lawnmower must never run over 

gravel, mulch or similar material which can damage the 

blades.

IMPORTANT INFORMATION
If the working area is adjacent to water 

bodies, slopes, precipices or a public 

road, the boundary wire must be supple-

mented with an edging or the like. It must 

then be at least 15 cm in height. This will 

prevent the robotic lawnmower from end-

ing up outside the working area under any 

circumstance.

Min. 

15cm

3018-046

35 cm

> 5 cm

3018-205

 1-5 cm

30 cm

3018-206

10 cm

max 1 cm

3018-208

3018-207

1157808,Gardena_R100Li-R130Li,GB_151217.indd   22

2016-01-12   09:16:12

Summary of Contents for SILENO R100Li





















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands