Assembling for vacuum mode:
DANGER! Cut injury!
v
Assemble the vacuum tube and the collection bag
completely before you use the product in vacuum
mode.
To assemble the vacuum tube:
9
ß
8a
ß
8b
7
6
8
DANGER! Cut injury!
v
Assemble both parts of the vacuum tube before you
start the product.
Note: When the vacuum tube is not assembled correctly to the
vacuum, a safety switch will prevent the vacuum from starting.
1. Connect both parts (
ß
8a
/
ß
8b
) of the vacuum tube
8
until the
connection audibly engages.
2. Tighten the screw
9
.
3. Push the vacuum tube
8
into the vacuum inlet
6
until the
interlock
7
audibly engages.
To remove the vacuum tube
8
push the interlock
7
and remove the
vacuum tube
8
.
r
t
2 q
e
w
0
z
To assemble the collection bag:
Note: When the collection bag is not assembled correctly, a safety
switch will prevent the vacuum from starting.
1. Push the collection bag
0
onto the vacuum outlet
2
until the
interlock
q
audibly engages.
2. Connect the collection bag strap
w
with the retainer
e
.
3. Connect the shoulder strap
r
with the retainer
t
.
4. Make sure that the earthing strap
z
is in touch with the ground.
5. Make sure that the collection bag
0
is completely closed.
To remove the collection bag
0
push the interlock
q
and remove the
collection bag
0
.
3. OPERATION
DANGER! Risk of injury!
Cut injury when the rotor blades turn or the product
starts accidentally.
v
Remove the battery and wait for the rotor blades to stop
before you adjust or transport the product.
To charge the battery:
CAUTION!
Overvoltage damages the battery and the battery
charger.
v
Make sure that you use the correct mains voltage.
For the GARDENA Battery Blower/Vacuum Art. 9338-55 there
is no battery in the scope of delivery.
18
EN
