background image

Risk of injury ! 

10

GB

Check your Turbotrimmer before each use 

v

Always visually inspect your Turbotrimmer
before each use.

v

Check that the ventilation slots are not
obstructed in any way.

Do not use your Turbotrimmer if the safety
devices (push button, safety cover) and / or 
the filament cassette are damaged or 
worn.

v

Never bypass the safety devices.

v

Inspect the area to be cut before you begin
work. Remove any foreign objects (such 
as stones). Look out for foreign objects
(such as stones) while you are working.

v

If you should come across an obstacle
while cutting, turn off the Turbotrimmer.
Remove the object and check the Turbo-
trimmer for any damage. If necessary 
have your Turbotrimmer repaired.

Use / responsibility 

The Turbotrimmer can cause serious injuries.

v

Use the Turbotrimmer only for the purpose
specified in these operating instructions.

You are responsible for the safety in the area
where you are working.

v

Ensure that there are no other people
(especially children) or animals within or
near the area where you are working.

v

Never use the Turbotrimmer if the safety
devices are damaged or defective.

Unplug the mains plug after use and check
your Turbotrimmer, especially the filament 
cassette, regularly for damage. Have your
Turbotrimmer repaired and / or replace the 
filament cassette if necessary.

v

Always wear an eye shield or safety
goggles !

v

Wear sturdy shoes and long trousers to
protect your legs. Keep your fingers and
feet away from the cutting filament – 
above all when starting work.

v

Always ensure that you have a secure
foothold whilst working.

v

Keep the extension cable away from the
area you are cutting.

Take extra care when walking backwards.
You may stumble ! 

v

Only work in the daylight or when visibility 
is good.

Interrupting work  

Never leave the Turbotrimmer unattended
where you are working.

v

If you stop work, unplug the mains plug
and store your Turbotrimmer in a safe
place.

v

If you stop work in order to move to 
another part of the garden, always switch
off the Turbotrimmer, wait until the tool
stops and then unplug the mains plug.

Familiarise yourself with the surroundings  

v

Familiarise yourself with the surroundings
and look out for possible dangers which
you may not hear due to machine noise.

v

Never use the Turbotrimmer when it is 
raining or in damp, wet areas.

v

Do not operate your Turbotrimmer directly
next to swimming pools or garden ponds.

Electrical safety 

Check the power cord regularly for damage
and signs of wear and tear.

Do not use your Turbotrimmer if the power
cord is damaged.

v

If the mains cord or extension cable is
damaged while you are working, unplug 
the mains plug immediately.
Do not touch the cable until the mains plug
is switched off.

The socket of the extension cable you are
using must be waterproof.

v

Only use permitted extension cables.

v

Ask your electrician.

For all portable units that are operated out-
doors we recommend using a fault circuit
breaker.
In Switzerland the use of a residual-current
device is obligatory.

3. Operation 

Risk of injury if the Turbotrimmer does not switch off when
you release the start button.

V

Never bypass the safety devices (by binding the start 
button to the handle, for example).

Summary of Contents for powerCut 2404













Reviews: