Gardena powerCut 2404, Operating Instructions Manual

Page: 5 / 12

I
E
K
M
N
J
J
L
Replacing the filament
cassette :
12
GB
Risk of injury !
Risk of injury !
Cleaning the cover
and ventilation slots :
F E
1. Leave the motor running.
2. Hold the cutting head
7
parallel to the
ground and tap the filament cassette
E
of the Turbotrimmer on the ground
several times in succession (approx.
3 times) (avoid applying sustained
pressure to the Turbotrimmer).
The filament is lengthened automatically.
Listen for the audible switching action.
The filament limiter
F
adjusts the filament to the correct length.
4. Maintenance
There is a risk of injury from the cutting filament !
V
Always unplug the mains plug of the Turbotrimmer be-
fore carrying out maintenance work !
Risk of injury and risk of damage to property !
V
Never clean the Turbotrimmer under running water or
with a water jet (in particular a high pressure water jet).
The ventilation slots must always
be free of dirt.
v
Remove any grass and dirt from
the cover
G
and ventilation slots
H
after each use.
Risk of injury !
A
V
Never use metallic cutting elements or replacement
parts and accessories not provided by GARDENA.
Only use original GARDENA Filament Cassettes. You can
order Replacement Filament Cassettes from your GARDENA
dealer or directly from the GARDENA Customer Service.
•
Filament Cassette for Turbotrimmer powerCut : Art. No. 5367-20
1. Unplug the mains plug.
2. Turn over the Turbotrimmer and rest it on the rubber buffer
of the handle.
3. Release the cassette cover
I
by pressing both locking clips
J
and remove the cover.
4. Remove the filament cassette
E
.
5. Remove any dirt.
6. Pull approximately 5 cm of the filament
K
out of the new
filament cassette
E
through the hole in the plastic ring
L
.
7. Insert the filament cassette
E
in the filament cassette holder
M
so that the filament
K
is inside the metal case
N
.
8. Fit the cassette cover
I
on the filament cassette holder
M
so
that you hear both locking clips
J
click into place.
When replacing the cover, ensure that the filament is inside the
metal case and is not trapped.
v
If the cassette cover
I
cannot be touched down, turn the
filament cassette
E
to and fro, until the filament cassette
E
is completely in the filament cassette holder
M
.
E
7
H
G