Cleaning the trimmer:
s
0
s
The ventilation slots must always be free of dirt.
v
Clean all moving parts after each use, and especially remove
any grass and dirt from the cover
0
and ventilation slots
s
.
Replacing the filament
cassette:
f
f
d
g
k
p
j
l
g
h
Risk of injury!
v
Never use metallic cutting elements or replacement
parts and accessories not provided by GARDENA.
Only use original GARDENA Filament Cassettes. You can
order Replacement Filament Cassettes from your GARDENA
dealer or directly from the GARDENA Customer Service.
• for Art. 9808 / 9809:
GARDENA Filament Cassette for Turbotrimmers
Art. 5307
• for Art. 9811:
GARDENA Filament Cassette for Turbotrimmers
Art. 5309
1. Press in cassette cover
d
on the two catches
f
at the same
time and remove.
2. Remove the filament cassette
g
.
3. Remove any dirt.
4. Pull approximately 15 cm of the cutting filament
p
out of the
new filament cassette
g
through the hole in the plastic ring
h
.
5. First thread the cutting filament
p
through the metal sleeve
j
.
6.
For Art. 9808 / 9809 only: Thread the cutting filament
p
around
the guide pin
k
.
7. Insert the filament cassette
g
into the filament cassette
holder
l
.
8. Fit the cassette cover
d
on the filament cassette holder
l
so that you hear both locking clips
f
click into place.
For Art. 9808 / 9809 only: When fitting the cassette cover
d
,
the cutting filament
p
must be placed around the guide pin
k
and must not be trapped.
v
If the cassette cover
d
cannot be touched down, turn the
filament cassette
g
to and fro, until the filament cassette
g
is completely in the filament cassette holder
l
.
18
GB
