background image

3. Assembly

Assembling the trimmer:

1

ß

R

2

4

3

7

8

9
6

5

 

CAUTION! 

 

 The trimmer may only be operated provided that the 

protective cover 

0

 is assembled.

1.  Pull the lock 

1

 belonging to the 

additional handle 

2

, push in both 

of the snap-fits 

3

 belonging to the 

additional handle 

2

 and, with the 

 grooves 

ß

R

 pointing forwards, snap 

them into the  holder 

4

.

2.  Place both halves of the impeller 

5

 

around the lower groove 

6

 of the 

trimmer head 

7

 and close until 

they  audibly engage.

3.  From the front, push the plant 

guard 

8

 into the upper groove 

9

 

of the trimmer head 

7

. In doing  

so, ensure that the installed bow 

can rotate freely (i. e. insert the  

bow with the kink pointing 

upwards).

4.  Place the protective cover 

0

 on 

top of the trimmer head 

7

.

5.  Turn the protective cover 

0

 until it 

can be pushed over the trimmer 

head entirely (the two arrows 

ß

A1

ß

A2

 

are directly across from each 

other).

6.  Rotate the protective cover 

0

 anti-

clockwise until it audibly engages. 

0

A1

ß

ß

A2

Do not use your Trimmer if the power cord is 

damaged.

v

  If the mains cord or extension cable is 

 damaged while you are working, unplug  

the mains plug immediately.  

Do not touch the cable until the mains  

plug is switched off.

Supply lines must be lighter than:  

–  common rubber lines (H 05 RNF),  

if rubber-insulated;

–  common PVC-coated lines (H 05 WF),  

if insulated with PVC.

Only connect the device to a mains circuit which 

is equipped with a residual current device (RCD) 

with a maximum release current of 30 mA.

In Switzerland the use of a residual-current 

device is obligatory.
Warning! This unit makes an electromagnetic 

 field while it operates. This field may under some 

conditions interfere with active or passive medi-

cal implants. To decrease the risk of conditions 

that can possibly injure or kill, we recommend 

persons with medical implants to speak with 

their physician and the medical implant manu-

facturer before  operating.
Warning! Keep toddlers away when you assem-

ble the unit. Small parts can be easily swal-

lowed. There is also a risk that the polybag can 

suffocate toddlers.

14

GB

 

 

 

Summary of Contents for ComfortCut 450/25











Reviews: