Risk of injury !
Risk of injury !
Cleaning the cover
and ventilation slots :
Replacing the filament
cassette :
E
1
GB
13
Cutting position
Park position
5
5
Starting your Turbotrimmer :
Trimming along lawn edges
and in awkward places :
1. Press the start button
D
on
the handle
8
.
The Turbotrimmer starts.
2. Release the start button
D
on the handle
8
.
The Turbotrimmer switches off.
1. For vertical cutting, loosen the tightening
nut
B
, turn the additional handle
A
180 °
and then tighten the nut
B
again by hand.
2. Swivel the plant guard
5
backwards to
the park position until it clicks into place.
3. Lift the Turbotrimmer by the handle
8
and additional handle
A
and turn to the
cutting position.
4. When trimming between paving stones,
hold the Turbotrimmer so that the cutting
filament moves slightly above the paved
ground.
5. Maintenance
There is a risk of injury from the cutting filament !
V
Always unplug the mains plug of the Turbotrimmer be-
fore carrying out maintenance work !
Risk of injury and risk of damage to property !
V
Never clean the Turbotrimmer under running water or
with a water jet (in particular a high pressure water jet).
The ventilation slots must always be free of dirt.
v
Remove any grass and dirt from the cover
1
and ventilation
slots
E
after each use.
Risk of injury !
A
V
Never use metallic cutting elements or replacement
parts and accessories not provided by GARDENA.
Only use the original GARDENA Filament Cassette. You can
order Replacement Filament Cassettes from your GARDENA
dealer or directly from the GARDENA Customer Service.
•
Filament Cassette for Turbotrimmer classicCut special :
Art. No. 5364 -20
A
B
8
8
D
