15
GB
Cleaning the filament cassette
and area around the filament
cassette :
If the automatic filament feed still does not work after pulling
the filament out of the filament cassette, the filament cassette
and area around the filament cassette may be dirty.
1. Remove the plastic ring
I
from the
filament cassette
H
as described
under
“Pulling the filament out of the
filament cassette”.
2. Unwind the filament
3
, clean the
filament cassette and the filament
then wind the filament back onto
the cassette.
3. Clean the automatic mechanism
lever
M
in the filament cassette
holder
J
.
The automatic mechanism lever must move freely.
4. Reinstall the filament cassette as described under
“Pulling
the filament out of the filament cassette”.
Only GARDENA Service Centres and authorised specialist
GARDENA dealers may carry out repairs.
Fault Possible
cause
Remedy
The Turbotrimmer
Filament cassette empty.
v
Replace the filament cassette
no longer cuts.
– see 5. Maintenance
“Replacing the filament
cassette” ).
Filament too short, drawn into
v
Pull the filament out of the
the cassette or stuck together.
filament cassette (see above).
Automatic filament feed is not
v
Clean the filament cassette
working since the automatic
and area around the
mechanism lever is jammed.
cassette (see above).
If you have any other problems please contact the GARDENA Customer Service.
7. Storage
The Turbotrimmer must be stored out of the reach of children.
v
Store your Turbotrimmer in a dry place where it is protected
from frost.
Recommended storage :
We recommend that you hang your Turbotrimmer from the cable
lock. Hanging storage helps avoid unnecessary stress on the
cutting head.
The product must not be added to normal household waste. It
must be disposed of in line with local environmental regulations.
v
Important: Make sure that the unit is disposed of via your
municipal recycling collection centre.
I
3
J
H
M
J
Storage :
Disposal :
(in accordance with
RL 2002 / 96 / EC)
