The charger unit provided may only be used to
charge the rechargeable batteries supplied with
the unit.
Non-rechargeable batteries must not be charged
with this battery charger (danger of fire).
The unit must not be operated during charging.
After charging, disconnect the charger from the
mains and from the battery.
Only charge battery between 10 – 45 °C.
After heavy duty service allow battery to cool down
first.
Maintenance and storage
RISK OF INJURY!
Do not touch blades.
v
When finishing or interrupting work push
up protection cover.
Keep all nuts, bolts and screws secure to be sure
the unit is in safe working condition.
The unit must not be stored over 35 °C or under
direct exposure to sunlight.
Do not store the unit in places with static
electricity.
2. INSTALLATION
Initial Operation:
1
2
DANGER! Risk of physical injury!
Cut injury when the unit starts accidentally.
v
Before you initially operate the unit, make sure that the
protective cover
1
is slid over the blade
2
.
To charge the battery:
The battery should be fully charged before using for the first time.
Charging time (see 7. TECHNICAL DATA).
The lithium-ion battery can be re-charged in any state of charge,
and the charging process can be interrupted at any time without
damaging the battery (no memory effect).
The unit cannot be started during charging.
3
4
5
WARNING!
Incorrect mains voltage damages batteries and the
battery charger.
v
Ensure the correct mains voltage.
1. Connect charging cable
3
to the jack
4
of the Battery Shear.
2. Connect battery charger
5
to an electrical socket.
During charging, the jack
4
flashes green. The battery is charged.
When the jack
4
lights up green, the battery is fully charged.
Check the charge status regularly while charging.
3. First pull the charging cable
3
out of the jack
4
and then unplug
the battery charger from the electrical socket.
When there is a sharp fall in the power of the battery, the unit
switches off and the battery needs to be charged.
5
GB
