2. ASSEMBLY
DANGER! Risk of injury!
Injury when the product starts accidentally.
v
Disconnect the product from the mains before
you assemble the product.
Connection possibilities of the connection nipple
[ Fig. A1 ]:
The hose can be connected via the connection nipple
(4)
with different hose diameters or the GARDENA Connection
System.
Large hose diameter
Detach nipple at
(a)
[ Fig. A2 ]
GARDENA Connection System /
Art. 9046: Medium hose diameter
Detach nipple at
(b)
[ Fig. A3 ]
Small hose diameter
Do not detach nipple
[ Fig. A4 ]
When using the largest hose diameter, the pump has the
maximum delivery capacity.
Pump
Art. 9030
Art. 9032
Art. 9040
Art. 9042
Art. 9046
Small hose
diameter
Art. GARDENA
Hose Clamp
25 mm (1")
Art. 7193
25 mm (1")
Art. 7193
32 mm (1 1/4")
Art. 7194
Medium hose
diameter
Art. GARDENA
Hose Clamp
GARDENA
Connection
System G 1"
GARDENA
Connection
System G 1"
32 mm (1 1/4") *
Art. 7194
38 mm (1 1/2")
Art. 7195
Large hose
diameter
Art. GARDENA
Hose Clamp
38 mm (1 1/2")
Art. 7195
38 mm (1 1/2")
Art. 7195
51 mm (2")
Art. 7196
When using the 38 mm (1 1/2") hose, we recommend the
GARDENA Flat Hose Set Art. 5005 with 10 m hose and
hose clamp.
* For Art. 9042 an additional connection nipple
ß
4a
for
1 1/4" hoses is supplied.
To connect the hose via the connection nipple:
1. When using the large diameter hose, cut off the
connection nipple
(4)
at
(a)
.
2. Only for Art. 9046: When using the medium hose
diameter, cut off the connection nipple
(4)
at
(b)
.
3. Push the hose onto the connection nipple
(4)
.
4. Fix the hose to the connection nipple
(4)
e. g. with
a GARDENA Hose Clamp.
Connect hose via the GARDENA Connection System:
With 25000DIRT (Art. 9046) the hose cannot be connected
via the connection nipple
(4)
with the GARDENA Connec-
tion System.
19 mm (3/4") / 15 mm (5/8") and 13 mm (1/2") hoses can
be connected via the GARDENA Connection System.
We do not recommend hose diameters smaller than
25 mm (1"), otherwise there will be a significant reduction
in the output of the delivery rate.
Hose diameter
Pump connection
13 mm (1/2")
GARDENA Pump Connection Set Art. 1750
15 mm (5/8")
GARDENA Pump Connection Set Art. 1750
19 mm (3/4")
GARDENA Pump Connection Set Art. 1752
1. Cut off the connection nipple
(4)
at
(b)
.
2. Connect the hose to the connection nipple
(4)
via the
appropriate GARDENA Connection System.
To assemble the pump connection [ Fig. A5 ]:
DANGER! Risk of injury!
Cut injury by the impeller.
v
Operate the pump only with the elbow
connector.
The hose can be easily connected and disconnected using
the locking devices
(2)
on the elbow connector
(1)
.
1. Screw the elbow connector
(1)
clockwise into the pump
until it stops. (If the hose is to be installed horizontally,
the elbow connector
(1)
can be screwed out again up
to half a turn.)
2. Only for Art. 9042 / 9046: Screw the connection
piece
(3)
into the connection nipple
(4)
.
3. Push the connection nipple
(4)
of the hose into the
elbow connector
(1)
until it stops and it engages audibly
and visibly.
The hose is securely connected to the pump.
3. OPERATION
DANGER! Risk of injury!
Injury when the product starts accidentally.
v
Disconnect the product from the mains before
you connect, adjust or transport the product.
To pump water:
If the pump cannot be immersed via the handle, the
pump must always be immersed via a rope. Attach
the rope by pulling it through the eyelets provided and
knotting it. Minimum immersion depth during initial
operation see 7. TECHNICAL DATA.
EN
13
