Gardena 8851, Operating Instructions Manual

Page: 8 / 15

17
GB
3. Unwind the cutting filament
1
, clean the filament cassette
O
and the cutting filament
1
and wind the cutting filament
1
onto the cassette
O
once more.
4. Insert the filament cassette again as described under
6. Maintenance “Replacing the filament cassette”.
Note :
The cassette cover
N
can also be pressed by hand to lengthen
the filament manually.
Fault Possible cause Remedy
The Turbotrimmer Filament cassette empty.
v
Replace the filament cassette
no longer cuts (see 6. Maintenance
“Replacing the filament
cassette” ).
Blade cover not removed.
v
Remove blade cover.
Tap mechanism doesn’t work
v
Remove filament that has
because the filament has disappeared into the
disappeared into the cassette cassette or fused (see
or fused. above).
A
In the event of other faults please contact GARDENA Service.
Repairs should only be carried out by GARDENA service centres or dealers
authorised by GARDENA.
8. Technical Data
Turbotrimmer ProCut 800 (Art. 8851) ProCut 1000 (Art. 8852)
Motor power consumption 800 W 1000 W
Mains voltage /
mains frequency
230 V / 50 Hz 230 V / 50 Hz
Filament thickness 2 mm 2 mm
Cutting width 350 mm 350 mm
Filament supply 2 x 3 m 2 x 3 m
Filament feed Tap mechanism Tap mechanism
Weight 5.0 kg 5.7 kg
Rpm of filament cassette 12,000 rpm 12,000 rpm
Work area related emission
characteristic value L
pA
1) 80 dB (A) 80 dB (A)
Noise level L
WA
2) measured 94 dB (A) / measured 94 dB (A) /
guaranteed 96 dB (A) guaranteed 96 dB (A)
Hand / arm vibration a
vhw
1) < 2.5 m / s 2 < 2.5 m / s 2
Measuring method according to 1) EN 786 2) directive 2000 /14 / EC
1
1
O