Factory reset:
Reset
L1
L2
L3
The smart Pressure Pump will be reset to the factory settings.
1. Push and hold down the Reset key for at least 5 seconds.
To start the pump:
0
q
9
s
L3
0
9
q
a
1. Loosen the lid
9
of the filter chamber with the spanner
0
provided.
2. Slowly fill in the liquid to be pumped into the filler connection
q
(approx. 2 to 3 l) until the water level no longer drops under the
suction side inlet or the water flows out at the horizontal connec-
tor. With fixed installations, loosen the black lid
s
and fill with
liquid until it flows towards the horizontal connector.
3. Drain the remaining water from the pressure hose to allow air to
escape during the filling and extraction processes.
4. Open all shut-off devices in the pressure line (watering accesso-
ries, valves, etc.), to allow air to escape during intake. If the delivery
line cannot be emptied due to fixed installation, loosen the black
lid
s
. Considerable amounts of liquid may escape. Please keep
a sufficiently large container at hand for collection.
5. Tighten the lid
9
of the filter chamber up to the stopper
a
.
6. Lift the pressure hose directly upstream of the pressure output.
7. Connect the power cable into a mains socket.
After 3 sec. the pump will start and the power LED
ß
L3
lit green.
8. Close the shut-off devices in the delivery pipeline when the pump
begins to continuously convey water.
9. The pump turns off automatically approx. 10 seconds after you
closed the shut-off device.
The pump is in normal operation (Standby).
The specified maximum selfpriming level (see 8. TECHNI
CAL DATA) is reached only when the pump is full and the
pressure hose is held up high directly upstream of the pres
sure output during the first selfpriming phase. This ensures
that the pumped medium cannot leak from the pressure
hose. When using a full suction hose with a check valve, it is
not necessary to hold up the pressure hose.
The suction process can take up to 6 min. If no water is
pumped afterwards, the Pump will stop automatically and
the GARDENA smart App displays an Error.
20
GB
