To install the Gateway:
6
4
5 6
An Internet connection is required for installation of the gateway.
The Gateway can be connected to the Internet via LAN or WLAN.
1. Insert the plugin power supply into a mains socket.
2. Insert the power supply cable into the port
(4)
of the gateway.
3. For LAN connection:
Insert the Ethernet cable into the Ethernet port
(5)
of the gateway.
4. Insert the other end of the Ethernet cable into the corresponding
port on the router.
5. (Available as an option from the Service team in the event that
the wireless range of the internal antennas is not sufficient).
Screw the external shortrange wireless antennas onto the two
connectors
(6)
.
4. OPERATION
Operation with the
GARDENA smart App:
The smart System is operated by the GARDENA smart App.
The GARDENA smart App can be downloaded from the Apple App
Store or the Google Play Store.
Settings of the Gateway:
– Setting up WLAN
– Set up external shortrange wireless antennas
Factory Reset:
7
The smart Gateway will be reset to the factory settings.
v
Push the factory reset button
(7)
.
5. MAINTENANCE
To clean the Gateway:
No caustic / abrasive cleaning agents should be used.
v
Clean Gateway with a damp cloth (do not use solvent).
6. STORAGE
To put into storage:
The unit must be stowed away from children.
v
Do not stow the unit outdoors if not in use.
Disposal:
(in accordance with
RL2012/19/EC):
The unit must not be added to usual household waste.
Refer to local environmental laws for discarding.
v
Important: Make sure that the unit is discarded through your
municipal recycling collection centre.
10
GB
