9
ASSEMBLY INSTRUCTIONS
Hardware Used
Hardware Used
4
4. Insert black silicone ring (G) onto shroud
cover from inside of wire guard assembly
(E). Open the gauge preassembled on
the top of wire guard assembly (E), then
carefully place glass tube (F) onto black
silicone ring (G). Close snap gauges.
6
5. Attach the emitter assembly (C) to the wire
guard assembly (E) with long bolts (BB) as
shown, leaving the bolts protruding above
the surface. Attach the top wire guard (B)
to the wire guard assembly (E), and then
tighten the long bolts (BB).
6.
Attach the reflector (A) to the
preassembled spacers on emitter
assembly (B) using acorn nuts (AA).
5
Acorn Nut
x 4
x 3
Long Bolt
