3
Instructions for Use
1. Use the drawing to mark the 3 hole positions.
2. Drill 3 holes with 5mm drill bit,60mm deep.
3. Screw and use socket set to tighten.
house real
1. Use the drawing to mark the 3 holes position.
2. Drill the hole with 12mm drill bit, 50mm deep.
(Tip: depth is important, use sticky tape around
the drill bit to mark 50mm depth)
3. Hammer plug into the holes.
4. Screw and use socket set to tighten.
After Sales Support
0871 911 7031
