14
XIV.
General Troubleshooting
fault Cause Handling
method
Not operating
Power cut
Waiting for power
restoration
Power switch not on
Switch on the power
Fuse burnt out
Check the problem and
replace the fuse
Leakage circuit breaker
being off
Check the problem and
switch on the leakage circuit
breaker
Not
Dehumidifying
It’s in defrost cycle
Wait to end the defrost cycle
and verify if the pool
environment temperature
isn’t below 1
0℃
The indicated
temperature of the
plummet isn’t between
1
0℃
and 4
0℃
Verify if the plummet is well
put.
Regulate the temperature
between 10
℃
and 4
0℃
If the problems above cannot be solved, please contact professional
workers and inform them of the product type and details about faults.
Attention! Never dismantle the machine and repair it by yourself so
as to avoid any danger.
XV.
Maintenance
Monthly:
Check and clean the filter if necessary. To do so, wash it with water
and soap, rinse and dry. If necessary change the filter.
Annually:
Regulating and controlling the operation of each control device
(thermostat-humidistat or hydro) if necessary vacuuming the interior of the latter.
Clean the unit with a embed cloth. Check the cleanliness of the reservoir and the
outlet pipe of the condensate. To improve the functioning of the device, can be
Summary of Contents for FAI-150-0012
Page 1: ...Dehumidifier User Manual ...
Page 28: ...23 ...
