5
3
Safety - English
3.1.1
PP600 – Safety
Please read this before using the PP600 family of products. If in doubt, contact
your distributor or Gardasoft Vision.
Where this symbol appears in the manual, refer to the text for
precautions to be taken.
3.1.2
Heat
The PP600 can get very hot. It should be positioned where personnel
cannot accidentally touch it and away from flammable materials.
Do not exceed the power ratings given in the manual. Note that at the
maximum ratings the case temperature can reach 80
o
C.
If the output load is short circuited then the heat dissipated within the unit will
greatly increase, resulting in a further rise in temperature.
3.1.3
Electrical
The user must ensure that the potential difference between any combination of
applied signals does not exceed the supply voltage. WARNING: Higher
voltages may cause a danger to personal health.
The PP600 does not have complete tracking isolation of inputs and outputs.
Transients caused by inductive loads must be suppressed external to the PP600.
The metal case is not connected to PSU 0v. This is a change from previous
revisions of the PP600.
3.1.4
General
The PP600 must not be used in an application where its failure could cause a
danger to personal health or damage to other equipment.
If the equipment is used in a manner not specified by the manufacturer, the
protection provided by the equipment may be impaired.
