GARANT HCT, User Manual, Page: 20 / 280

de
en
bg
da
fi
fr
it
hr
lt
nl
no
pl
pt
ro
ru
sv
sk
sl
es
cs
hu
GARANT Digital dial indicator HCT
 Open the casing only at the battery cover to change the batteries.
 Do not make any unauthorised modifications.
3.4. PERSONAL PROTECTIVE EQUIPMENT
Comply with the national and regional regulations for safety and accident prevention. Select and provide protective work
wear such as safety shoes and safety gloves appropriate for the risks associated with the intended activities.
4. Transport
Transport in the original packaging at temperatures between -10°C and +60°C. Prevent from falling.
5. Device description
Digital dial indicator for measuring lengths and differences in lengths and for taking reference, flatness, positional and run-
out measurements.
Digital display with additional scale.
External data transmission via proximity cable (USB), Power-RS (power USB) or via BT.
External data transmission via proximity cable (USB) or via Power-RS (power USB).
6. Device overview
6.1. DIAL INDICATOR
A
1 MENU button 6 Clamping shank Ø8 or 3/8"
2 SET button 7 Ball contact point Ø2/M2.5 or 4-48-UNF
3 DATA button 8 Lifting cap
4 Button (left) 9 Socket for proximity cable
5 Button (right) 10 Battery insert or power cable socket
6.2. BUTTON FUNCTIONS
MENU MENU Switches between the functions of the two function levels on the dial indicator. The first level con-
tains basic functions; the second contains advanced functions.
SET SET  Confirms a selection.
 Switches off the dial indicator.
DATA  Moves to the next step within a function.
 Switches between the BT modes OFF / HID / APP.
 Transfers measurement values.
Left /
right  Define the display area for the scale.
 Reduce/increase the numerical value step by step.
 Activate the setting for the nominal value and tolerance limits.
6.3. DISPLAY OVERVIEW
B
11 Low battery 21 Upper limit value exceeded
12 + / - display 22 Tolerance indicator
13 Keyboard lock 23 Lower limit value of scale
14 Display of 6 digits 24 Upper limit value of scale
15 Hold the measurement value 25 Unit and scale graduation
16 Data transmission 26 Tolerance mode
17 Unit of measurement mm / INCH 27 MIN/MAX/DELTA mode
18 Preset mode 28 Multiplier
19 Scale 29 BT connection
20 Lower limit value undershot 30 Symmetrical tolerances
20