GARANT 921401, Instruction Manual

Page: 50 / 532

en
GARANT Workbench with electric height adjustment
5.3.2. Inserting the drawers
(Fig.
J
)
1. Pull the drawer runners out to their full extent and secure them.
» Check that the drawer runners run correctly in their guides on the workbench.
2. Reinsert the drawer and push it in until you sense resistance.
3. Slightly raise the drawer and push it past the resistance.
4. Continue to push the drawer in until it is fully supported by the rails.
5. Swing the side levers down and push them forwards.
» The drawer can now be pushed fully home.
6. Repeat the procedure for the other drawers.
5.4. MOVING THE MOBILE WORKBENCH
(Fig.
K
)
WARNING
Rotating parts
Crush hazard by parts of the body being pulled in or run over when moving the workbench.
» Do not reach into rotating parts.
» Do not wear any loose jewellery.
» Wear safety shoes and safety gloves.
» Wear close-fitting clothing.
» Keep long hair contained within a hair net.
WARNING
Collision with the workbench
Crush hazard for the body in the event of collision with the workbench or other objects.
» Make sure the paths for movement and transport are clear.
» No persons must be present in the direction of travel of the workbench.
Instruction manual 50