GARANT 921401, Instruction Manual

Page: 48 / 532

en
GARANT Workbench with electric height adjustment
5.1. MOVING THE WORKTOP UP AND DOWN
WARNING
Moving parts
Crush hazard for the hands and feet when the worktop height is being adjusted.
» Wear safety shoes and safety gloves.
» Do not place the feet under the spindle lift column.
» Do not reach under the worktop whilst height adjustment is in progress.
» Do not reach into the spindle lift column.
NOTICE
Overloading
Spindle lift system defect due to excessive weight or excessive period of operation.
» Comply with the maximum load capacity of the individual drawers and storage shelves.
» Do not operate the height adjustment continuously for longer than 2 minutes. Then allow a
pause of 18 minutes.
» Do not operate the height adjustment for longer than 6 minutes in any hour.
» The worktop will not rise if the workbench is overloaded.
5.1.1. Raising the worktop
(Fig.
F
)
Keep the ▲ button depressed until the desired working height is reached.
5.1.2. Lowering the worktop
(Fig.
G
)
Keep the ▼ button depressed until the desired working height is reached.
5.2. LOADING THE WORKTOP
(Fig.
H
)
1. Keep the ▼ button depressed until the bottom stop is reached.
2. Carefully load the workpiece on to the worktop.
» Comply with the maximum load capacity.
3. Keep the ▲ button depressed until the desired height is reached.
Instruction manual 48