Part 1: Install the Mounting Bracket
Before you mount the bracket, determine the location in your garage where you would
like to store your item. Make sure there will be enough space between the walls and
where you mount the bracket so your item does not bump into anything on its way up
or down.
NOTICE
The mounting bracket needs to be installed in the center of a ceiling stud.
MyLifter units from Garage Smart are designed to be secured to flat ceil-
ings only.
Do NOT
attempt to secure lifters to angled ceilings or walls.
Do NOT
install the mounting bracket in any manner other than specified
in these instructions.
1. Place the item you want to store on the floor in the area where you want to lift it.
2. Use your tape measure to measure the distance from the two nearest walls to
the center of the item you will be lifting.
3. Use your ladder to mark these same measurements on the garage ceiling. You
will use this mark as a reference point to find the nearest ceiling stud.
4. Use a stud finder to find the stud that is closest to reference point mark on the
ceiling.
