Gaoke BG9000, User Manual

Page: 16 / 24

14
Figure 18 ring group configuration
Figure Configuration
he destination number will be sent all in one time for SIP application, digitmap is used to
determine exactly when there are enough digits entered from the user to place a call. If the
number length of suited route item is fixed, the number will be sent when specified number of
digits is received; the call will be disconnected when inter-digit timeout expires.
Table 1-1
Digitmap Characters
Character Description
0 ～ 9 Indicates specific digits in a telephone number expression.
X Wildcard, matches any digit, excluding “#” and “*”.
* Digit star
# Digit pound
- Connects the start and the end of a range
[] Indicates the a range of numbers(not letters).
. Matches an arbitrary number of occurrences of the
preceding digit, including 0.
| Indicates a choice of matching expressions (OR).
T Inter-digit timeout expires
S Short timer expires, usually place at the middle of an
expression
Digitmap Example
8XXXXXXX|1[0-24]0|2[18].3|3XXSXX|[0-9*#][0-9*#][0-9*#].#|[0-9*#].T
 “8XXXXXXX” denotes numbers start with 8, the length is 8.
 “1[0-24]0” denotes numbers include 100, 110, 120 and 140.
 “2[18].3” denotes numbers that start with 2 and end with 3, there can be arbitrary length of 1
or 8 after the first digit 2. 23, 213, 2183 is matched.
 “3XXSXX” denotes numbers start with 3, the length can be 3 or 5. If the short timer configured
expires between the third digit and the fourth digit, the number will be sent.
 “[0-9*#][0-9*#][0-9*#].#” denotes numbers end with #, and the length is no less than 2.
“[0-9*#].T” denotes any number that dialing time out.
Choose menu voice management== 》 FXO/FXS parameter management== 》 Figure into
figure configuration page ， Equipment configuration by default an idd call number 。 If the