16
10.5 SNMPconfiguration
ANMP Administrator Configuration
SNMP network is advantageous to the batch of equipment management, including batch
update, batch configuration, and network management to hang under the router equipment,
convenient maintenance.If you have a network management station, equipment is best when
the installation is to enable SNMP. Choose Menu system maintance==
》
SNMP access into
SNMP web configuration interface.Including IADMS network management station
address/domain is must configure parameters, equipment identified as to reflect the
configuration of the equipment using the customer property.As shown in figure 21 example,
IADMS 172.16.0.90 is network management station address, and the device on the network
site registered successfully, and the name BG9000_ceshi display on IADMS network
management
You can configure the SNMP parameters and view the registration status of SNMP.
Choose the
menu System→SNMP to load the following page
The following items are displayed on this screen:
► Register Enable: Check this box to enable SNMP register.
► Server Address or Domain: Enter the IP address or domain name of register server.
BG9002N User Manual
Page 106 of 133
► Server Port: Enter the port of Register Server.
► TRAP Message Interval: Set the sending interval between TRAP messages.
► Regional Identity: Set the identity of regional.
► Device Identifier: Set the identifier of device.
► Enable Double Register Server: Check this box to enable backup Register Server.
► Backup Server Address or Domain: Enter the IP Address or Domain Name of Backup
Register
Server.
► Backup Server Port: Enter the port of Backup Register Server.
► Registration Status: The status of registration. Read only.
