Ganz ZC-PT336N-IR, User Manual

Page: 24 / 39

E-4. AUTO SCAN - ENDLESS
Auto Scan can be set to endless rotation by enabling the endless option. The default setting is
OFF.
E-5. AUTO SCAN
‒
SPEED
The scan speed can be programmed from 05 /S up to 35 /S.
The default setting is 10 /S.
E-6. AUTO SCAN - DWELL TIME
The dwell time at the start and end points can be programmed from 1 second to 30 seconds. The
default setting is 03 seconds.
E-7. AUTO SCAN - SAVE AND EXIT
To save the memorized data and escape this page, move the joystick right or press the pan right
key when the cursor is at SAVE AND EXIT.
E-8. AUTO SCAN - EXIT
To escape this page, move joystick to the right direction.
OSD Menu Setting
F. Tour Set
8 Programmable tours can be set and each tour can have up to 64 preset steps. After setting up
the tours the 71 ˜ 78+Preset buttons launch group tours #1 ˜ 8.
F-1. TOUR SET - TOUR NO.
Up to 8 group tours can be programmed.
F-2. TOUR SET - TOUR TITLE
To set a tour title, use the joystick left / right or pan left / right keys. Each title can have up to 16
characters. Press ZOOM TELE button to move the next character from left to the right and ZOOM
WIDE button to move the next character from right to left. (Space displays when
□
appears.) The
tour title is not displayed on the monitor and is only for the reference of user.
F-3. TOUR SET - TOUR STEP
Each tour group consists of up to 60 preset steps with different dwell time and speed.
It is possible to match any preset # for any tour step.
F-4. TOUR SET- PRESET NO.
For each tour step it is possible to select any preset number up to 64. The default setting is BLK.
F-5. TOUR SET - DWELL TIME
Dwell time can be programmed from 1-99 seconds. The default setting is 03 seconds.
F-6. TOUR SET
‒
SPEED
Each tour step can be set with a different speed up to 200 /S.