EG-8
When you have finished adjusting the direction of the lens, tighten the locking
screw with a screwdriver.
Attaching the service monitor
Use the service monitor cable to check and adjust camera direction, focus,
and angle on a service monitor.
Adjusting the camera direction
The camera body is set in a tri-axial mounting allowing movement in the
pan, tilt, and rotational planes.
Adjust the direction of the lens so it faces the subject.
Attention
●
Using the camera in a near-horizontal position will show the camera cover
on screen.
●
Forcibly adjusting the camera to point in directions beyond the limits of
the mounting may cause the cable to catch on internal components and
damage the camera.
The service monitor is not supplied with
this unit. Please have one ready.
350º Pan
350º Rotation
180º Tilt
Locking screw
Indicates the top
of the camera
(US)ZC-D5000NTSC_0830.indd 8
2006/08/30 15:18:22
