PEOPLE COUNTING SYSTEM
CONFIGURATION - INSTR. MANUAL
040515
6
In section “Action”, activate only the HTTP option as in picture below, which will be
properly configured as explained in point 2.2:
2.2. HTTP Server on GANZ GXi devices
In order to activate data sending from VCA device to the VCOUNT700RP server, you
need to define the IP address of the VCOUNT700RP server in VCA device.
In “ Address” field (menu ‘Setup
Event Configuration
HTTP’), please enter the IP
address of VCOUNT700RP unit (port number: 80). No logon information are requested.
Enable ‘Append detailed information’ for ZN-XE, ZN1, ZS1 series devices, as per below
snapshot on the right.
ZN-VE devices:
ZN-XE, ZN1, ZS1 devices:
