![background image](http://html1.mh-extra.com/html/ganz/vcount700rp/vcount700rp_instruction-manual_3420863003.webp)
PEOPLE COUNTING SYSTEM
CONFIGURATION - INSTR. MANUAL
040515
3
1. VCOUNT700RP server configuration
1.1 Network settings (IP address)
The VCOUNT700RP unit has DHCP mode set as a default, so please make sure your
DHCP server (router) can provide an IP address to this unit properly.
As a next step, you need to recognize what IP address was assigned to this unit by
DHCP server. To recognize IP address of VCOUNT700RP unit, you can use any software
available for network scanning purpose, e.g. Advanced IP Scanner.
As you can see on above picture, VCOUNT700RP unit was detected with factory set
name ‘Raspberry Pi’, and its IP/MAC address is shown as well (you can find also MAC
address printed on label of VCOUNT700RP unit).
1.2 Logging in
To login to the VCOUNT700RP system, you need to enter its IP address into a n y
web browser, and then enter the default ID and password.
ID: cbc
Password: cbc