Ganz PixelPro ZN-DT2MAP, User Manual

Page: 7 / 39

7
Installation Preparation
1) Remove Dome Cover
Loosen four hexalobular screws by supplied L-key wrench and remove Dome cover.
2) Remove four screws
Remove four screws and o-lings from camera base.
3) Attach the cushion plate.
Attach the supplied bottom cushion plate to the camera base by 3M tape.
1 2 3
Mounting to a ceiling / wall
1) Secure the camera to ceiling or wall with four supplied tapping screws and o-ring.
2) Secure the Dome cover to camera base by supplied hexalobular L-key wrench.
1 2