17
6. Audio
The GANZ PixelPro camera
could transmit audio to other clients, using a connected
external microphone and could play audio received from other clients via connected
speakers. This section describes how to configure the basic audio settings for the
GANZ
PixelPro camera
, such as setting the communication mode, adjusting the sound levels in
the microphone and speakers connected to the camera.
Note:
The speakers connected to the audio output must have a built-in amplifier,
such as PC speakers.
Audio
ON/OFF : Check this to enable audio in the PixelPro camera.
Codec
G.711 u-law
MIC Volume
Speaker Volume
Adjust the MIC and Speaker Volume .
Audio Input
Audio from a connected a line source could be connected to the Audio in connector
of the GANZ PixelPro camera. If there are problems with the sound input being too
low or high, adjust the
input gain
for the microphone connected to the GANZ
PixelPro camera.
Summary of Contents for PixelPro ZN-DT2MAP
