![background image](http://html.mh-extra.com/html/ganz/pixelipro-series-zn-b1a/pixelipro-series-zn-b1a_user-manual_561050028.webp)
PixelPro User’s Manual
ZN-B2MA/ZN-B1MA/ZN-B1A Ver1.30
11. Network
11.1 IP Setup
IP Address Configuration
The GANZ PixelPro supports both IP version 4 and IP version 6 (IPv6 will be supported as of v3.0).
Both versions may be enabled simultaneously, and at least one version should be always enabled.
When using IPv4, the IP address could be set automatically via DHCP, or a static IP address could
be set manually. If IPv6 is enabled, your camera receives an IP address according to the
configuration within the network router.
There are also options for setting up notification of changes in the IP address, and for using a
Dynamic Domain Name Service (DDNS).
NOTE:
IP address assignment via DHCP may lead to the situation where the IP address changes
and you lose contact with the camera. If your DHCP server can update a DNS server, you can access
the GANZ PixelPro by a static host name, regardless of having a dynamic IP address. Configure the
options for notification of IP address change (under Services) to receive notification from the camera
when the IP address changes.
DNS Configuration
DNS (Domain Name Server) provides the translation of host names to IP addresses on
your network.
Primary DNS server
Enter the IP address of the Primary DNS server for your network.
Secondary DNS server
Enter the IP of the Secondary DNS, which is used if the Primary DNS server is unavailable.