![background image](http://html.mh-extra.com/html/ganz/pixelipro-series-zn-b1a/pixelipro-series-zn-b1a_user-manual_561050009.webp)
PixelPro User’s Manual
ZN-B2MA/ZN-B1MA/ZN-B1A Ver1.30
2.3
Adjusting the Camera Direction
The camera body can be set with bracket movement.
2.4 Adjusting the Image and Focus
To adjust the position of the lens:
ZN-B1A (Normal Lens)
1. Open the
Live View
page in your web browser.
- Select the
Setup
tab, and open the
Installation
page.
- Set ‘Installation Mode’ to ‘ON’ and select the ‘Video Format' (NTSC or PAL).
2. Connect supplied video monitor cable to video output connector, then connect it to analog
monitor with coaxial cable.
- Unscrew the zoom puller on the lens by turning it counter-clockwise.
- Adjust the zoom setting and re-tighten the zoom puller.
- Unscrew the focus puller on the lens to adjust the focus, and re-tighten the focus puller.
3. Check the image from the
Live View
page on your web browser.
- Set ‘Installation Mode’ to ‘OFF’ to resume normal camera operation.
NOTE:
DC Auto-Iris should always be disabled while focusing the camera. This will set the iris to
the wide open position, which yields the smallest depth of field, and thus the best conditions for
focusing the lens. When the focus has been set by using this method, it will maintain its focus in
any kind of lighting conditions.
ZN-B1MAP, ZN-B2MAP (MFZP Lens)
1. Open the
Live View
page in your web browser.
- Select the
Setup
tab, and open the
Video -> Camera
page.
- Click ‘Lens Adjustment’
.
2. Set the desired Zoom position.
3. Click ‘One Push Focus’ button for adjust focus automatically or set focus manually.