Ganz PixeIPro Series zn-md2xxm, User Manual

Page: 26 / 40

PixelPro
Series User’s Manual
06-2014-A
25
10.2 Network > Service Port
Service Port
HTTP port- The default HTTP port number (80) could be changed to any port within the
range 1-65535. This is useful for simple port mapping.
RTSP port- The RTSP protocol allows a connecting client to start an H.264 stream. Enter
the RTSP port number to use. The default setting is 554.
NOTE: After changing the default port numbers, the user can use the
“
MultiUpgradeTool
.exe”
to search and connect automatically.
10.3 Network > RTP
RTP port range , Multicast Setup
These settings are the IP address, port number, and Time-To-Live value to use for
the video stream(s) in multicast H.264 format.
Only certain IP addresses and port numbers should be used for multicast streams.