ZNT1-‐P Series
ZNT1-P Installation Guide
CBC America LLC.
9
Wall Mount
1)
Attach the wall mount with the junction
box to the wall that can bear the weights
of the wall mount and the camera.
2)
Drop all the necessary cables from the
wall mount.
3)
To open the top cap of the camera to
install the camera, loosen the torx screw
on the top cap of the camera by using the
torx L-‐wrench included in the package.
4)
Open the top cap by twisting it clockwise
and making the alignment marks both on
the top cap and the camera body aligned
on the side of the opened padlock mark on
the top cap.
5)
Put the camera body aside.
6)
Attach the top cap of the camera to the
wall mount by inserting the neck of the
top cap to the wall mount and rotating the
top cap counter-‐clockwise until it cannot
rotate anymore.
7)
Insert the provided two set screws to
each of the screw hole on the wall mount,
and tighten them to firmly attach the top
cap of the camera.
