![background image](http://html1.mh-extra.com/html/ganz/g2-thermal-znt1-p-series/g2-thermal-znt1-p-series_installation-manual_3413769007.webp)
ZNT1-‐P Series
ITC4500 Installation Guide
CBC America LLC.
7
4. INSTALLATION
4.1. Installing the camera
Ceiling Mount
Padlock marks
Torx screw
Alignment
marks
1)
Install the ceiling mount to a ceiling that can
bear the weights of the mount and the camera.
2)
Drop all the necessary cables from the ceiling
through the pipe of the ceiling mount.
3)
To open the top cap of the camera to install the
camera, loosen the torx screw on the top cap of the
camera by using the torx L-‐wrench included in the
package.
4)
Open the top cap by twisting it clockwise and
making the alignment marks both on the top cap
and the camera body aligned to the opened padlock
mark on the top cap.
5)
Put the camera body aside.
6)
Attach the top cap of the camera to the ceiling
mount by inserting the neck of the top cap to the
ceiling mount and rotating the top cap counter-‐
clockwise until it cannot rotate anymore.
7)
Insert the provided two set screws to each of the
screw hole on the ceiling mount and tighten them
to firmly attach the top cap of the camera.