ZNT1-‐P Series
ZNT1-P Installation Guide
CBC America LLC.
8
To prevent products from damage, place the camera on stable and non-‐vibrating
surfaces. If the stability is in doubt, consult safety personnel for reinforcements,
and then proceed with the installation.
Caution
!
Safety
Wire
8)
Before attaching the camera’s main body, make
sure the safety by connecting the safety wire from
the top cap to the safety wire holder on top of the
camera’s main body.
9)
Connect all the necessary cables from the ceiling
to the corresponding connectors on the main body
by referring to
5. CONNECTIONS
.
10)
Insert the microSD/SDHC card into the card slot
if necessary.
11)
Close the top cap of the camera by twisting it
counter-‐clockwise and making the alignment marks
both on the top cap and the camera body aligned to
the closed padlock mark on the top cap.
