![background image](http://html1.mh-extra.com/html/ganz/c-allview/c-allview_installers-manual_3427316006.webp)
4 Offer the camera to the mount adaptor and clip the
lanyard onto the lug of the mount adaptor. In
addition to being an essential safety device during
operation, the lanyard is useful as a temporary
hanging point when the camera is being
mounted in the inverted position.
5 Carefully note the orientation notch-
es of cable connector and camera
socket. Align the notches accordingly
and insert the connector onto the socket
of the camera base. Twist the connector’s
retaining ring until it locks into place.
6 Remove the four hex head bolts from
the camera base and push the connector
back into the mount adaptor.
7 Align the four holes of the mount adaptors with those on the camera base and
insert the four hex head bolts.
8 Tighten the bolts to approximately 1.6Kg/m. Do not over tighten bolts.
IMPORTANT: Ensure that the lanyard is connected to the appropriate lug
on the mount adaptor when the camera mounting is complete. Also, dou-
ble check all bolts for correct positioning and appropriate tightness.
Summary of Contents for C-AllView
Page 1: ...C AllView C AllView Ti installer s guide...
Page 2: ......