Insert your gobo slide into the gobo reten
ti
on hole, it should rest easily on the spring that is within the
hole.
Next, screw the gobo reten
ti
on ring back into the hole un
til it
begins to resist. Once it begins to resist,
con
ti
nue turning it one quarter of a turn and then stop. This will give enough tension to hold the gobo,
but will not over-
ti
ghten the reten
ti
on ring. Please be careful not to over-
ti
ghten the extension ring or
you risk damaging both you
r fixture an
d your gobo.
Once the gobo is in place within the retainer system, you can focus your op
ti
cs to your desired
effe
ct.
