Safety and Opera
ti
on notes:
Please carefully review the following safety notes regarding the Storm Form micro gobo projector. These
notes are important for safe installa
ti
on and usage of the product.
Do not look directly at the light source while the
fi
xture is powered on.
Inspect all power cables for damage or crimped cable before use.
Make sure that your circuit is properly grounded and all electrical safety precau
ti
ons have been
taken to prevent electric shock.
Be aware that the
fix
ture will become HOT to the touch when it is le
ft
on.
Allow several minutes for the light to cool before touching it
after
extended periods of on
ti
me.
Ensure that there are no
fl
ammable materials close to or in contact with the light
fixtu
re.
Never touch the lenses within the
fixtu
res. If the lenses must be cleaned, use a micro
fi
ber cloth
and glasses cleaning solu
ti
on.
Make sure that the locking cable connectors are fully
ti
ghtened when the product is installed.
Check the voltage of the power line before connec
ti
ng
the fix
ture to ensure that it is within the
required range for the
fixt
ure.
In the event of a serious op
eratin
g problem, cut power to the
fi
xture and cease op
erati
on
immediately.
For technical support, please contact
or call 1-855-GANTOM1 (1-855-
426-8661).
Assembly:
