background image

 

 

Gantom Juni User Guide 

Version 1.0 – 3/31/2021 

INSTALLING ACCESSORIES 

The Gantom Juni has a retention ring on the front for holding a polycarbonate lens shield (included with 
the fixture), or a third-party sourced dichroic glass filter or plastic gel. For beam shaping and glare 
control, Gantom offers a separately sold accessory kit (FA38) which includes an angled cutaway snoot, a 
top hat, and a honeycomb hex louver. Please note that a separate retaining ring is included in the FA38 
to accommodate the added depth from the hex louver and any additional accessories installed with it.  

 
Installing the accessory:

 

An accessory can be installed by first unscrewing the front retaining ring shown 

below.  

 

Once the retaining ring is removed, the accessory can be inserted.  Place the accessory in the desired 
orientation, then tighten down the retaining ring. 

    

 

 

Product Support: 

We hope that this guide has been effective for learning how to use your Gantom Juni or Gantom Juni 
DMX light fixture. However, if you run into a wiring issue, a bug in the software, or just a light that 
doesn’t seem to want to cooperate, we at Gantom are ready to help you out! Just send an email to 

[email protected]

 and we will get back to you as soon as possible.

 

Summary of Contents for Juni











Reviews: