Gantom Juni User Guide
Version 1.0 – 3/31/2021
POWER AND WIRING REQUIREMENTS
The Gantom Juni has a maximum wattage of 9W and and
requires 12VDC power.
This fixture is
compatible with dimmable 12VDC constant voltage LED drivers. Generally, PWM dimmers which work
with 12VDC LED tape will also work with the Juni. Here is a diagram showing how this fixture could be
connected to a 0-10VDC dimmer switch:
The Gantom Juni has bare wires for power input, and includes a screw terminal adapter which allows
you to connect the fixture to a standard 2.1mm DC barrel jack.
Note: all fixtures must be installed with the low voltage supply power OFF. Hot
plugging (connecting to a live power supply) is not supported.
Hot plugging a fixture into a system with a running power supply will increase the load on the power
supply, which can generate voltage spikes that more than double of the standard input voltage. This
causes an out-of-spec and out-of-warranty voltage condition which may result in damage to the fixture.
While Gantom fixtures have internal protections against voltage spikes, it is recommended that
installers handle them with care to prevent these spikes from happening in the first place.
Installing all fixtures in the system before turning on power to the low voltage
power supply assures that the power supply has a “soft start” which is free from
harmful voltage spikes.
BARE WIRE PINOUT
Power
+
RED
-
BLUE