background image

 

 

Gantom 7 User Guide 

Version 1.0 – 12/15/2017 

OTHER OPTIONS SCREEN

 

If you hit the “Other Options” button on the control screen, the following menu appears:  

o

 

Reset 

- selecting this will reset the fixture to its default 

factory settings. Do this if you are running into programming 
issues. 

 

o

 

Lock/Unlock 9600

 – The Gantom DMX fixture can listen 

to either a standard DMX signal OR to the special control 
signal that comes from the app.  Lock 9600 will turn OFF the 
fixture’s ability to listen to DMX and ONLY allow it to be 
controlled through the app interface. For most applications it 
is recommended that you keep “UNLOCK 9600” selected. 

 

 

 

 

BOOT SEQUENCE FLASHING 

When the fixture first receives power, before it enters normal operation, it will first report its channel 
mapping profile and second report its DMX address through a sequence of  flashes.  
 
Profile Report: Though the Gantom 7 has seven colors available, not all DMX consoles have the ability to 
utilize all seven of them.  Some users may prefer to operate the Gantom 7 as though it were an RGBW 
or RGBA fixture because there are readily available preset profiles for those fixtures on many existing 
DMX control environments. The Gantom 7 has five channel mapping profiles available: RGB, RGBA, 
RGBW, (MASTER)RGBAWU, and (MASTER)RGBAWLU.  More information on these can be found later in 
the DMX Controlled Operation section.  The Gantom 7 will report the profile it has selected by rapidly 
flashing through the colors of that profile. There will be a slight pause, then the fixture will report its 
DMX address. 

Address Report: After reporting which channel mapping profile is selected, The Gantom 7 will report its 
DMX address by flashing through another sequence of colors which represent its DMX address. Red 
flashes indicate the first digit, green flashes indicate the second digit, and blue flashes indicate the third 
digit of the DMX address. For example, if the Gantom 7  is assigned to address 245 it will indicate its 
channel mapping profile, then report its address by flashing red 2 times, then flashing green 4 times, 

Summary of Contents for Gantom 7









Reviews: